Looking to get the smooth ride of a penny board but can’t bring yourself to buy one? Well, why not try something new and put penny board wheels on your skateboard?
It’s an exciting way to create something truly unique that you know won’t be seen anywhere else. You’ll also get the added bonus of feeling great knowing you’ve created something custom-made just for you that gives a totally different riding experience from your average skateboard.
So go ahead and give it a try you never know what unexpected surprises await.
Quick Answer: ‘Yes’ it is possible to put a pair of penny board wheels on a skateboard. There are a few things to keep in mind when replacing skateboard wheels with penny board style wheels, however.
- To ensure that the penny board wheels fit correctly they must match the width and size of the skateboard’s current wheels.
- Secondly, penny board trucks can have different bolt patterns than skateboard trucks, so you should also check that they match up before purchasing new trucks or adapters.
- With the right selection of parts, an upgrade from traditional skateboard wheels to more maneuverable penny board ones can result in an enjoyable ride.
Are penny board wheels the same as skateboard wheels?
Penny board wheels are often confused with skateboard wheels, but the two actually have different characteristics.
Penny boards tend to be smaller, with wheels measuring around 59mm, while skateboard wheels can range from 50mm to 100mm. Penny boards typically feature higher durometer and bigger bearing holes for a smoother ride than skateboards.
In terms of design, there is also a difference between penny board and skateboard wheels, as penny board wheels are designed specifically for smoother rides on surfaces like sidewalks and streets instead of the traditional skate parks.
As such, penny boarders must pick their wheel designs carefully depending on where they plan to ride.
Can you put penny board wheels on a skateboard?
If you are looking for a unique way to customize your skateboard, why not consider replacing the wheels with penny board wheels?
Penny boards feature smaller than average wheels that make them better suited for a certain type of ride.
Not only can you customize your skateboard by swapping out the wheels, but those new wheels offer more stability, quicker acceleration and increased grip on various terrains. With this newfound control and agility comes greater confidence in skating; allowing you to take on tougher challenges without worry or fear.
Navigate urban areas with improved precision and conquer street spots like a pro all thanks to penny board wheels mounted onto your ordinary skateboard.
Can you put any wheels on a skateboard?
Yes, you can put wheels on a skateboard. The type of wheel you choose will depend on the style and purpose of your ride. For instance, if you plan to do tricks on your board, then you may want a narrower wheel with harder urethane that is lightweight and quick to accelerate. On the other hand, if speed is your main goal, then larger wheels with softer urethane are more suitable since they provide better grip and a smoother ride while offering greater stability at high speeds.
Wheels are typically sold in sets of 4-6 and vary in size; standard sizes range from 48mm to 65mm in diameter. Additionally, there are multiple durometers available, which measure the hardness of the wheel’s urethane and are indicated by an “a” followed by a number (the higher the number, the harder the wheel). Soft wheels offer superior grip for street or park skating but will wear down faster than harder wheels; hard wheels last longer but provide less traction.
When considering new skateboard wheels be sure to factor in terrain type (street or park), performance objectives (speed vs trickality), and budget constraints. Additionally, you’ll want to make sure your chosen truck fits properly with the width and diameter of your desired wheel set before buying them. This is because too narrow of a wheel won’t fit around the truck axle properly resulting in excessive wobbling while wider wheels can cause unwanted contact between trucks and deck when making sharp turns or riding close to obstacles like curbs or railings.
How to Put Penny Board Wheels on a Skateboard?
Swapping out your skateboard’s wheels with ones from a penny board is not only an easy process, but it can also be a great way to customize your ride. Penny board wheels are significantly smaller than traditional skateboard wheels, which makes them well-suited for performing tricks and navigating tight turns. If you’re looking to switch up your skateboard game with some new wheels, here’s the step-by-step guide on how to put penny board wheels on a skateboard.
Step 1: Gather the Tools You Need – The tools you need for this project are relatively simple and should be easy to find in most households. You will need a Phillips screwdriver, a flathead screwdriver, and a set of penny board wheels. Make sure that the size of the wheel matches the size of the axle nuts found on your skateboard—most penny board wheels are 57mm or 59mm in diameter.
Step 2: Remove Old Wheels – Begin by using the Phillips screwdriver to remove all eight axle nuts from your skateboard. After removing these nuts, set aside both the axles and their respective hardware for later use.
Step 3: Mount New Wheels – With all 8 nuts removed, take one wheel at a time and place it onto its respective axle. Make sure that each wheel is facing outward so that they point away from each other as you mount them onto either side of the board. Once all four wheels are mounted onto their respective axles, proceed to step 4.
Step 4: Secure Wheels – Now that all four wheels have been mounted onto their respective axles, you can begin attaching the hardware back onto your skateboard. Start by placing one nut at each end of each axle before tightly securing them together with the flathead screwdriver. Make sure that each nut is tightened securely so that there won’t be any rattling as you ride your new setup around town.
Step 5: Enjoy – Finally, once all 8 nuts have been securely fastened onto their respective axles and corners of the board, it’s time to get out there and enjoy! Before taking off though make sure to double check that everything is properly secured so that you don’t risk damaging yourself or your equipment while skating around town.
Do penny board wheels make a skateboard ride better?
Penny board wheels can certainly make a skateboard ride better in many ways.
- Firstly, Penny boards are known for their durability and strength, meaning that the wheels on these boards are made to last. The quality of the wheels is generally high, as they are designed to provide a smooth ride on any terrain.
- Additionally, Penny board wheels come in many different colors and designs to choose from, which adds an element of customization to your skateboard experience. Furthermore, the wheels on Penny boards tend to be larger than those found on other types of skateboards, which allow for a more comfortable ride with more stability.
- Finally, because these boards use polyurethane-based wheels, they offer great grip and traction while riding, making it easier to perform tricks and maneuvers safely.
All these factors combine to make Penny board wheels an excellent choice for anyone looking for improved skateboarding performance and experience.
Are penny board wheels worth the money?
Penny boards are a popular and cost-effective way to get around town, so it’s no surprise people often ask whether the wheels that come with these skateboards are worth the money.
Yes, Penny board wheels are designed to be lightweight and durable, providing users with an enjoyable ride on most surfaces. They also have a large diameter and wide profile, allowing them to roll smoothly over uneven terrain.
In addition to their durability and performance, penny board wheels offer several other advantages. For example, they are easy to replace as needed and don’t require any special tools or maintenance.
Their low price point also makes them an economical option for riders on a budget. Furthermore, penny board wheels come in a variety of colors and designs, giving riders the opportunity to customize their ride according to their personal style.
How long do penny board wheels last?
Penny board wheels typically have an average lifespan of anywhere from six months to two years depending on the frequency and intensity of use.
Regular maintenance is essential in ensuring that you get the most out of your wheels; regular cleaning, tightening of axle nuts, and proper storage can all affect how long they last. The type of material used in the wheel construction also plays a role: polyurethane tends to be more durable than plastic and will generally last longer over time.
Additionally, riding terrain can cause wear and tear on the wheels; concrete, cobblestone, or other abrasive surfaces are especially rough on the wheels and may reduce their lifespan significantly. Choosing smoother surfaces such as wood or asphalt to ride on can help prolong their life considerably.
Taking all these factors into consideration, penny board riders can expect their wheels to last anywhere from nine months up to three years if they are properly maintained and stored away when not in use.
We’ve looked at the differences between penny boards and skateboards and what separates them, including size and wheel type.
So if you’re wondering whether you can put penny board wheels on a skateboard, the answer is yes; you can indeed switch out regular skateboard wheels for those designed for penny boards.
But be aware that this is not recommended and may mean your skateboard will not perform as desired. Be sure to use caution when trying this modification as it could have unpredictable results.