When it comes to skateboarding, having the right trucks is one of the most important elements that determines how smoothly and safely you’ll be able to ride.
But when it comes to picking out the perfect set of trucks for your board, understanding how they are measured can be a complicated process.
In this guide, we will break down everything you need to know about skateboard truck measurements including axles size, widths, angles and heights – so that you can pick out the best set of trucks for your style of riding.
How are skateboard trucks measured?
Are you looking for a new set of skateboard trucks? Before you make your purchase, it is important to know the size of your current truck setup. By taking accurate measurements, you can ensure that your new trucks will give you the performance you are after.
Method 1 — Use a Ruler or Tape Measure
The simplest way to measure your skateboard trucks is with a ruler or tape measure.
Start by measuring the width of the hanger (which is where the kingpin attaches).
You will want to measure in millimeters, either from inside edge to inside edge or outside edge to outside edge.
Next, measure the axle length (which is the distance between where the wheels attach).
Again, use millimeters as your unit of measurement. This method works best when verifying sizes on existing setups or when ordering configuration-specific replacement parts.
Method 2 — Use an Online Calculator
If you don’t have access to a ruler or tape measure, there are several online calculators available for measuring skateboard truck dimensions.
All you need to do is enter some basic information about your board setup and let the calculator do its work.
This method works best if you have access to several measurements but can’t quite seem to figure out which one goes where.
Method 3 — Check Manufacturer Specifications
Another way to determine your truck size is by checking manufacturer specifications on their website or in product descriptions.
Most manufacturers will list all relevant specs such as hanger widths and axle lengths so that customers can easily compare products side-by-side before making a purchase decision.
This method works well when shopping for replacement parts or comparing different makes and models of trucks.
Method 4 — Measure with a Skateboard Tool
If you don’t have access to a ruler or tape measure, you can also use a skateboard tool to take measurements.
This tool is designed specifically for taking measurements on skateboards, and it gives users more precision than the methods mentioned above.
The tool works by clamping onto the truck and measuring the exact width of the hanger and axle length.
It is a great solution for those who are looking to get as close to perfect measurements as possible.
Method 5 — Measure with Calipers
The most accurate way to measure your skateboard truck setup is to use calipers.
This tool gives you an incredibly precise measurement, and it is the best way to make sure that your new trucks will fit perfectly on your board.
Calipers are a bit more expensive than other measurement methods, but if you want absolute accuracy they are the way to go.
Skateboard trucks are integral components of any skateboard and they need to be the right size to ensure a safe and enjoyable ride.
A good way to make sure your truck is the right size is by measuring it using a ruler or caliper, or even by referring to standard wheelbase measurements.
Understanding how skateboard trucks are measured can help you pick the right parts for your board and allows you to customize its design.
Ultimately, no matter what kind of board you’re riding, having the correct-sized vehicles should never be taken for granted.
So, when in doubt about measuring your skateboard truck, don’t hesitate to consult an expert – ensuring safety is always key.
How do you measure skateboard truck size?
The best way to measure skateboard truck size is with a ruler or tape measure. Start by measuring the width of the hanger and then measure the axle length. You can also use an online calculator, check manufacturer specifications, or use a skateboard tool or calipers for more accurate measurements.
What is the standard size for skateboard trucks?
The standard size for skateboard trucks is about 5-7 inches in hanger width and 7-8.5 inches in axle length, depending on the type of truck and board that you have. However, always double check your measurements before buying new trucks to make sure they will fit properly.
What are the different types of skateboard trucks?
The two main types of skateboard trucks are standard trucks and reverse kingpin (RKP) trucks. Standard trucks have a hanger that is wider than the axle, while RKP trucks have an axle that is longer than the hanger. Other types of skateboard trucks include drop-through, mini, and longboard trucks.
What are the parts of a skateboard truck?
The parts of a skateboard truck include the hanger, axle, kingpin, bushings, and baseplate. The hanger is the metal T-shaped piece that attaches to the board and holds the wheels, while the axle runs through it and allows the wheels to spin freely. The kingpin is a bolt that tightens or loosens the truck, while the bushings provide cushioning between the hanger and baseplate. The baseplate holds it all together and provides stability.