Skateboarding is a thrilling sport that requires balance, skill, and finesse.
It can be frustrating when you find yourself unexpectedly turning in the wrong direction while attempting to maneuver your board. This phenomenon, known as “wheelspin,” occurs when the wheels of your skateboard suddenly start to spin in the opposite direction of what you intended.
This can feel like an insurmountable obstacle and make it difficult to progress in your riding skills. Wheelspin is caused by the combination of a skateboard’s weight, grip tape, and the way that forces interact with each other.
The friction between your skateboard’s grip tape and its wheels can cause them to rotate at different speeds, resulting in an unexpected turn or spin. Skateboards are naturally flexible and require a certain amount of pressure on their trucks before they will respond correctly to rider input. If too much pressure is applied during any given trick attempt, it can throw off the overall balance of the board and cause wheelspin.
After all, if you’re attempting tricks that require fast rotations or abrupt changes in direction then there is more opportunity for wheelspin to occur due to centrifugal force. In this guide, we’ll discuss some reasons why wheelspin can occur and explain how you can prevent it from happening.
Reasons Why Your Skateboard Turns on Its Own
If you’ve ever been skateboarding and noticed that your board seems to have a mind of its own, turning inexplicably in one direction or another, you’re not alone.
1. Worn-out bearings:
If your skateboard often turns on its own, worn-out bearings are the likely culprit.
Over time, due to the pressure of riding, bearings can become cracked and unable to support skateboarding movements.
Relying heavily on a single bearing when performing tricks could potentially damage it beyond repair.
As bearings age, they become susceptible to extreme temperatures as well as moisture from rain or puddles of water, which can further damage them. Thus, a regular change of bearings is an essential part of keeping your skateboard functioning optimally.
So in order to ensure smooth rides and uninterrupted fun while riding your board, make sure you swap out old and worn-out bearings in a timely manner.
2. Uneven weight distribution on the board:
Have you ever been skateboarding and noticed that your board seems to turn towards one way or the other? It might be because of an uneven weight distribution on the board.
Your board will naturally tend toward the end with more weight as it rolls forward, which means that if you don’t take special care to distribute additional weight while boarding, your ride could be extremely off balance.
The wheelbase of your deck also plays a role in offsetting any imbalance—but it won’t completely make up for a lack of distributed weight between rider and board.
Taking the time to evenly set up your stance on the board will help ensure a smoother ride by enabling constant control.
Uneven distribution can cause discomfort and even accidents if left unchecked, so it’s important to pay attention to how evenly balanced you are.
3. Loose trucks:
Do you often find yourself struggling to master the art of skateboarding, but end up frustrated when your board keeps taking off on its own?
The secret to this conundrum may be in the trucks. If your board’s trucks are too loose, it will be hard for you to control.
Loose trucks can cause the board to turn unexpectedly by allowing some “play” in the mechanism, creating an imbalance when you try to push off or pivot the board.
You can think of the loose truck as a bit like a distraction from a soccer team trying to stay focused on their game plan – it turns off track.
4. Debris or pebbles caught in the wheels:
You may have a buildup of dirt and pebbles in the wheels.
When something blocks the wheel, it causes friction and can create an unpredictable jerking motion, turning your board when you didn’t expect it to.
Taking a few extra minutes to double-check that there is nothing stuck in your wheels could save you from faceplanting into the sidewalk.
Practicing a few kick turns with clean wheels will give you confidence and help make sure you don’t overcompensate for debris caught in your wheel ultimately resulting in smoother skateboarding experiences.
5. Inconsistent bushings:
Unfortunately, if your bushings are inconsistent this can throw off your ride.
Inconsistent skateboard bushings are caused by many things, from deteriorating due to wear and tear over time, to not setting them up correctly in the first place.
Inconsistent bushings will cause your board to turn on its own, often in a sporadic and unpredictable way that makes it difficult to control your board.
While replacing your bushings may seem like a daunting task at first, correct setup is paramount for achieving a fluid and consistent ride.
6. Uneven pavement or terrain
Uneven pavement or terrain can be a hassle if you’re trying to skateboard.
Not only can it throw off your balance, but it can also turn your board on its own accidental accord.
The surprise moments created by sudden turning of the board caused by uneven terrain can be unnerving and disorienting, especially if you’re just learning to skateboard or if the board suddenly turns towards someone, possibly causing harm.
Be mindful of rough ground while biking and double-check the pavement before boarding so you’re prepared with any unexpected turns.
7. Incorrect mounting of the trucks to the board:
This issue is usually due to incorrect mounting of the trucks to the board.
Trucks should be mounted properly in order for the rider’s weight to be properly balanced when skating, whether pushing off the ground or above obstacles.
If the bolts are loose, then vibrations from the ground below can cause unbalance and thus feel like your board is turning on its own accord.
Protect yourself from avoidable hazards by ensure that all screws are tight before you attempt any skateboarding tricks.
8. The rider’s stance or foot placement on the board:
The stance or foot placement of the skateboard rider is one of the essential factors in achieving a smooth ride while skating.
Foot position determines how much control the rider has over their board and can have an effect on turning speed, stability, weight distribution and overall performance.
To allow for efficient carving, riders should set up their feet so that they’re parallel with the tail, centered on it with an even amount of weight in each foot.
This will ensure balance for turns, kickflips and other tricks as you’ll know where your feet are going to land when doing those maneuvers.
It’s important to spread your feet more than shoulder-width apart so that you can maintain your balance throughout any motion required (pushing off or turning).
Finally, different types of tricks require more specific footing depending on the direction and speeds desired by riders –so experimentation is key.
9. Warped deck or damaged board:
This issue can cause extra strain on your trucks and bearings, causing them to malfunction and make the board unstable.
However, fear not as there are ways and means to diagnose, address and prevent these problems from happening again.
Check for damage such as marks grooves or breaks in the board itself. If all else fails, you should consider replacing the affected parts of your skateboard altogether.
A good preventive measure would be to ensure that your board doesn’t sit in the sun for too long; otherwise the heat can cause it to warp and damage components more quickly than normal use.
10. Poor quality or damaged wheels:
Poor quality wheel material can cause uneven hollows and flat spots as they wear down which in turn affects steering and maneuverability.
Damaged wheels can also be caused by obstruction such as pebbles and rocks that get caught within it or worse if you accidentally run them over with a heavy object like a car.
Even just simple exposure to elements like extreme heat or cold, or even rain and dirt can further deteriorate the condition of the wheel and its stability to respond correctly to the ground surface when rolling.
In any case, these conditions can all lead to subpar performance from your skateboard so it is always good practice to check up on your wheel quality regularly before going for an awesome ride.
Does it matter which way the skateboard is facing?
Yes, it does matter which direction the skateboard is facing.
The board should be going in the same direction as your feet and most of your weight should be towards the tail end of the board.
This will allow you to maneuver with better control and stay balanced while riding. It also helps if you’re turning by allowing you to lean into the turns more effectively.
The direction of motion should also be considered when stopping, as you will want to slow down in a straight line rather than turning to one side or the other.
This can help avoid any unnecessary strain on your board and trucks.
In conclusion, there are many potential reasons why your skateboard may have started turning the opposite way. It could be due to the bearing, trucks, board, wheels or even the rider’s stance.
To avoid any accidents and mishaps due to potentially faulty components, it is important to do regular maintenance checks on your skateboard in order to make sure that everything is functioning correctly.
With this article as a guide, we hope you now have a better understanding of how all the components in your skateboard combine to provide a smooth, enjoyable ride.
What causes my skateboard to turn on its own?
A number of things can cause your skateboard to turn on its own, including loose trucks, poor wheel quality, damaged board or rider’s stance. It is important to do regular maintenance checks and replace faulty components in order to prevent any accidents from happening.
How can I prevent my skateboard from turning on its own?
To prevent your skateboard from turning on its own, make sure that all components are in good condition and properly tightened. This includes the trucks, bearings, wheels and board itself. A rider should position their feet correctly for optimal control over their board and to ensure proper balance. It’s important to avoid exposing your skateboard components to extreme elements such as heat and cold which can damage them over time.
What is the best way to maintain my skateboard?
The best way to maintain your skateboard is to do regular maintenance checks on all components and replace any faulty parts. It’s also important to ensure that everything is properly tightened, and be mindful of your stance when riding in order to have better control over your board. You should avoid exposing your skateboard to extreme elements such as heat and cold. This way, you can ensure that your skateboard remains in good condition for a smooth and enjoyable ride.