When skateboarding, the grip tape on your board is an absolute necessity.
Not only does it provide you with extra traction, but it also helps to protect your board from scratches and wear-and-tear as you ride.
Unfortunately, constant use can take its toll on grip tape, causing it to tear or even completely fall off but don’t worry.
Replacing grip tape isn’t nearly as hard (or expensive) as you might think. In this guide, we’ll discuss how to replace the grip tape on a skateboard so that you can get back out there in no time.
Can you replace grip tape on a skateboard?
Yes, it is possible to replace grip tape on a skateboard.
The process of replacing grip tape requires peeling off the old grip tape from the board, cleaning the board with rubbing alcohol, removing any residue from the board with a rag or paper towel, cutting the new grip tape to size and shape of the skateboard deck, and carefully applying it firmly on to the board.
Applying too much pressure when putting on the new grip tape can cause air bubbles in between the tape and deck which can reduce its effectiveness.
It’s important to align each edge of the grip tape with that of the skateboard deck for optimal performance.
How do you replace grip tape on a board?
The grip tape on your skateboard or longboard is crucial to maintaining your safety and performance levels while riding.
However, grip tape eventually wears down and can become damaged over time, making it necessary to replace it.
While this may seem intimidating at first, replacing grip tape is a relatively simple process that anyone can do with the right tools and techniques.
Method 1: Using a Heat Gun
One of the most efficient ways to remove grip tape is by using a heat gun.
This method involves applying heat to the grip tape, which softens the adhesive underneath, making it easier to peel off the old tape.
Begin by using a heat gun on low heat to warm up the tape, then increase the heat and use a scraper tool to lift and peel the tape from the board.
Use a clean cloth to wipe off any remaining grip tape residue, and you’re ready to apply the new tape.
Method 2: Using a Hair Dryer
If you don’t have a heat gun, a hair dryer is an alternative option for softening the adhesive.
However, this method may take longer than using a heat gun. Use the hairdryer on high heat to warm up the grip tape, then use a scraper tool to lift and peel off the grip tape from the board.
Wipe off any remaining residue with a clean cloth and apply the new grip tape onto the board surface.
Method 3: Using a Razor Blade
If you prefer a more hands-on approach, using a razor blade is another option for removing the grip tape.
This method is best for smaller areas of the board or for removing excess adhesive after using heat or a hairdryer.
Be careful not to damage the board while using a razor blade. Once you have removed the old grip tape, clean the board surface thoroughly before applying the new tape.
Method 4: Using Grip Tape Remover
For those who don’t want to use a heat gun or razor blade, grip tape remover is a popular option.
This type of remover is specifically designed to dissolve and soften the adhesive on grip tape, making it easier to remove.
Apply the remover onto the grip tape, wait for a few minutes, and the grip tape should easily peel off.
Use a clean cloth to wipe off any remaining residue, and you’re ready to apply the new grip tape.
Do I need to remove old grip tape from a skateboard?
Yes, it is important to remove old grip tape from a skateboard before applying new grip tape.
Removing the old grip tape ensures that the surface of the board is clean and ready for the new adhesive to adhere properly.
If you do not remove the old grip tape, it can potentially reduce the effectiveness of your new grip tape and reduce your safety while riding.
It is also important to clean the board with rubbing alcohol before applying new grip tape as it removes any dirt or debris that might prevent a proper bond between the deck and grip tape.
Following these steps will ensure that your new grip tape is applied correctly and securely onto your skateboard.
Ultimately, replacing grip tape on a skateboard is an easy process and one that can be done in as little as 10 minutes after acquiring the correct supplies.
The great thing about this process is that you don’t require special tools or specific expertise to complete the task.
On the other hand, be sure not to rush and take your time when putting new grip tape down on your board.
This will allow you to ensure that the traction of the skateboard has been improved before you head out onto ramps and rails.
So if your grip tape has seen better days, don’t fret — just invest some time, grab a few supplies, and get ready for a smooth ride ahead.